Why Do We Need a Guide To Choose The Right Car Jumper
Almost all drivers experience this in their lifetime. When you’re trying to start your vehicle but it just won’t turn on despite all the tries you’ve made, you probably have a discharged battery. There are a few ways to fix this whether by using a good samaritan’s vehicle or your own equipment. Whatever the case, it is always a good idea to store jumper cables in your compartment, you never know when it will come in handy. Now all you need to do is to learn how to jump start a car battery and this guide will explain how to choose the right Car Jumper.
What is a Car Jumper or Jump Start?
Car jumpers or jump start, is the process of starting a vehicle with a discharged starting battery by using another battery from a different vehicle. This can be accomplished by using a temporary cable connection to the battery of the other vehicle.
When to Jump Start a Vehicle?
Vehicles should only be jump started when the battery is causing the problem. So, before jump starting a car, turn the ignition and listen to the sound it makes. If you hear the engine cranking, then the battery is fine and jump starting it won’t solve the problem. However, if you turn the ignition and you hear nothing, then it is possible that you have a dead battery so jump starting it may get you back on the road.
Way to Jump Start a Vehicle
There are three ways of jump starting a vehicle depending whether you are prepared for these kinds of situations or not.
The first method is by jump starting the vehicle without using cables. This can be accomplished if you have a standard transmission car. All you need to do is to get your buddies or good samaritans to push your car. While the people are pushing your car, step on the clutch and put the car in first gear. Turn on the ignition while leaving the clutch fully depressed. Release the clutch quickly when you reach 6-8 miles per hour. Keep repeating this if you fail the first time. This can also work downhill without the need of other people’s help.
Second method, you’ll have a good set of jumper cables in your compartment. Here’s what you need to do: First, you need to find another vehicle with a driver willing to help you. Make sure both the vehicles are turned off on the side of the road. Then, Connect the cables to their respective terminals in both cars(positive and negative). After the cables are secure, start the functioning vehicle for 2-3 minutes before starting the malfunctioning car. If this all goes well leave the malfunctioning car running for about 30 minutes to provide the battery enough recharge.
If you’re smart and prepared, you’ll have your own jump starter. What will you do if you’re driving home from an overtime at work and your car battery suddenly died. Not a a lot of drivers are willing to stop for anyone in the middle of the night to help jump start a car. What you need is your very own Jump Starter. All you need to do is follow the steps provided in the second method using a Jump starter instead of relying on passing vehicles.
Guide To Choosing The Right Car Jumper
You can get a rechargeable, portable jump starter. These will offer at least ten jump starts per charge, and are conveniently sized to fit in the compartment. Some units have other functionalities but others focus solely on providing good jump starting capabilities.
You may choose between Plug-in Jump Starters or Jump Boxes. Plug-in Jump Starters can give between 2 and 10 amps, and most units have multiple settings. Jump Boxes on the other hand cannot charge a dead battery. However, these units are portable, and they have the capability to provide the necessary amperage to start a car that has a completely dead battery.